| Version 2 (modified by , 13 years ago) ( diff ) |
|---|
How to install PostGIS 2.0 on Ubuntu 12.04 (precise)
UNDER CONSTRUCTION AS OF 5/5/12 2000 PT.
This page is targeted at new users and will be written as simply as possible.
Source or Packaged?
The page is in development. Methods posted below are accurate as of last page update.
Prerequisites
Prerequisites can be found at PostGIS Support Matrix
Key libraries to focus on: GEOS, GDAL. Issues related to these two libraries will dictate the method you choose to use to install PostGIS 2.0.
Installation using the existing Sharpie Oneiric PPA (Personal Package Archive)
The good news: following these steps *will* install PostGIS 2.0 successfully.
sudo apt-get install python-software-properties sudo apt-add-repository ppa:sharpie/for-science sudo apt-add-repository ppa:sharpie/postgis-nightly sudo apt-get update sudo apt-get install postgresql-9.1-postgis
The bad news: it still installs an older version of libGDAL - 1.7 - which is listed as "not recommended" in the Support Matrix. libGDAL 1.9 is recommended.
Tricky thing: libGDAL 1.9 has been built to depend on libGEOS 3.3.2, and libGEOS 3.3.3 is listed as the preferred library in the Support Matrix.
So, let's see if we can get all of the supporting libraries to the recommended versions.
Build GEOS 3.3.x
PostGIS 2.0 requires GEOS >= 3.3.2 for topology support, however Ubuntu 11.10 only has GEOS 3.2.2 available in packages, so it needs to be built from source. If you don't need topology, you don't need to build this component, but it is highly recommended.
These are the instructions for building geos 3.3.3 found elsewhere on trac.osgeo.org, but they did not work for me in 12.04:
sudo apt-get install g++ ''--- added to other instructions, not installed by default in 12.04 & required for this make wget http://download.osgeo.org/geos/geos-3.3.3.tar.bz2 tar xvfj geos-3.3.3.tar.bz2 cd geos-3.3.3 ./configure make ''--- this failed'' sudo make install cd ..
{{{make failure: make[4]: Entering directory `/home/jeffme/geos-3.3.3/src/algorithm/locate' source='IndexedPointInAreaLocator.cpp' object='IndexedPointInAreaLocator.lo' libtool=yes \
DEPDIR=.deps depmode=none /bin/bash ../../../depcomp \ /bin/bash ../../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../../../include -I../../../include/geos -I../../../include -DGEOS_INLINE -pedantic -Wall -ansi -Wno-long-long -ffloat-store -c -o IndexedPointInAreaLocator.lo IndexedPointInAreaLocator.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../../../include -I../../../include/geos -I../../../include -DGEOS_INLINE -pedantic -Wall -ansi -Wno-long-long -ffloat-store -c IndexedPointInAreaLocator.cpp -o .libs/IndexedPointInAreaLocator.o ../../../libtool: line 1128: g++: command not found make[4]: * [IndexedPointInAreaLocator.lo] Error 1 make[4]: Leaving directory `/home/jeffme/geos-3.3.3/src/algorithm/locate' make[3]: * [all-recursive] Error 1 make[3]: Leaving directory `/home/jeffme/geos-3.3.3/src/algorithm/locate' make[2]: * [all-recursive] Error 1 make[2]: Leaving directory `/home/jeffme/geos-3.3.3/src/algorithm' make[1]: * [all-recursive] Error 1 make[1]: Leaving directory `/home/jeffme/geos-3.3.3/src' make: * [all-recursive] Error 1 }}}
Several components are needed, which can either be built from source or installed from pre-built packages, as shown below.
Install prerequisite packages using:
sudo apt-get install build-essential postgresql-9.1 postgresql-server-dev-9.1 libxml2-dev proj libjson0-dev xsltproc docbook-xsl docbook-mathml
Optional package for raster support (this is required if you want to build the PostgreSQL extensions):
sudo apt-get install libgdal-dev
Build PostGIS
wget http://postgis.refractions.net/download/postgis-2.0.0.tar.gz tar xfvz postgis-2.0.0.tar.gz cd postgis-2.0.0
PostGIS 2.0 can be configured to disable topology or raster components, using the configure flags --without-raster and/or --without-topology. The default is to build both. Note that raster is required for the extension installation method for PostgreSQL.
./configure make sudo make install sudo ldconfig sudo make comments-install
Lastly, enable the command-line tools to work from your shell:
sudo ln -sf /usr/share/postgresql-common/pg_wrapper /usr/local/bin/shp2pgsql sudo ln -sf /usr/share/postgresql-common/pg_wrapper /usr/local/bin/pgsql2shp sudo ln -sf /usr/share/postgresql-common/pg_wrapper /usr/local/bin/raster2pgsql
Spatially enabling a database
With PostgreSQL 9.1, there are two methods to add PostGIS functionality to a database: using extensions, or using enabler scripts.
PostGIS Extension for PostgreSQL
Spatially enabling a database using extensions is a new feature of PostgreSQL 9.1.
Connect to your database using pgAdmin or psql, and run the following commands. To add postgis with raster support:
CREATE EXTENSION postgis;
To add topology support, a second extension can be created on the database:
CREATE EXTENSION postgis_topology;
Enabler Scripts / Template
Enabler scripts can be used to either build a template, or directly spatially enable a database. This method is older than the extension method, but is required if the raster support is not built.
The following example creates a template, which can be re-used for creating multiple spatially-enabled databases. Or if you just want to make one spatially enabled database, you can modify the commands for your needs.
PostGIS:
sudo -u postgres createdb template_postgis sudo -u postgres psql -d template_postgis -f /usr/share/postgresql/9.1/contrib/postgis-2.0/postgis.sql sudo -u postgres psql -d template_postgis -f /usr/share/postgresql/9.1/contrib/postgis-2.0/spatial_ref_sys.sql sudo -u postgres psql -d template_postgis -f /usr/share/postgresql/9.1/contrib/postgis-2.0/postgis_comments.sql
with raster support:
sudo -u postgres psql -d template_postgis -f /usr/share/postgresql/9.1/contrib/postgis-2.0/rtpostgis.sql sudo -u postgres psql -d template_postgis -f /usr/share/postgresql/9.1/contrib/postgis-2.0/raster_comments.sql
with topology support:
sudo -u postgres psql -d template_postgis -f /usr/share/postgresql/9.1/contrib/postgis-2.0/topology.sql sudo -u postgres psql -d template_postgis -f /usr/share/postgresql/9.1/contrib/postgis-2.0/topology_comments.sql
